fbpx
Student Engineering Project

Temperature Controlled Electric Heater

A temperature-controlled electric heater that monitors water temperature and switches the heating element around a user-defined threshold.

⚙Embedded Systems ◆Student Project
Temperature Controlled Electric Heater project prototype
Completed project — Temperature Controlled Electric Heater Click to view

Project Overview

This project presents a temperature-controlled electric heater intended to prevent the heater from continuing to operate beyond a user-defined temperature.

An LM35 sensor provides an analogue temperature signal to the microcontroller. The processed value is displayed on a 16×2 LCD and used to switch the heating element according to the stored user setting.

How the System Works

  1. The LM35 measures the temperature of the heated medium.
  2. The analogue sensor signal is converted and processed by the controller.
  3. The current temperature is shown on the 16×2 LCD.
  4. The user sets the desired temperature threshold using the control switches.
  5. The controller switches the heating element according to the measured temperature and configured threshold.

System Architecture

◆LM35Temperature sensing
→
◆MicrocontrollerADC & threshold logic
→
◆LCDTemperature display
→
◆Heater DriverElement control
→
◆Heating ElementThermal output
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT