fbpx
← BACK TO PRODUCTS
AutoCOS Hybrid

AutoCOS Hybrid — Three-Phase Automatic Changeover System (27 kVA / 8 kVA)

AutoCOS Hybrid is a three-phase automatic power changeover and generator management system developed by Opstep Engineering Ltd. It intelligently selects between three power sources—public utility supply (PHCN), a Mikano diesel generator and a petrol generator—using a predefined priority sequence. The system combines microcontroller-based decision-making, GSM communication, automatic generator-start and stop controls, industrial contactors, auxiliary relays and manual operating controls within a centralized electrical control panel. Designed for a power installation incorporating a 27 kVA diesel generator and an 8 kVA petrol generator, AutoCOS Hybrid provides coordinated source selection, load transfer and remote generator-control functionality.

AutoCOS Hybrid three-phase automatic changeover control panel with PHCN, diesel and petrol generator source indicators
What it does

What the product does

AutoCOS Hybrid was developed to address the challenges of managing multiple three-phase power sources in environments where public electricity is unreliable and backup generators have different operating capacities.

Unlike conventional automatic changeover systems that select between public utility power and a single generator, AutoCOS Hybrid manages three independent supply sources according to their assigned priorities.

The public utility supply is the primary source. A Mikano diesel generator serves as the first backup, while a petrol generator provides a secondary backup when the higher-priority sources are unavailable.

At the centre of the system is a custom embedded electronic controller responsible for monitoring source availability, interpreting operating conditions and coordinating the appropriate switching sequence.

The electronic controller interfaces with an industrial power-switching assembly consisting of three-phase contactors, control relays, timers, protection components and manual selector switches.

A SIM800L GSM module provides mobile-network communication, enabling the system to send operating feedback and receive remote generator-control commands.

The diesel generator's starting and stopping operations are integrated through starter-motor cranking and fuel-valve control. The petrol generator is also incorporated into the automatic and remotely controlled generator-management arrangement.

The resulting system combines embedded electronics and industrial electrical control into a unified power-management solution.

How it works

How it works

The AutoCOS Hybrid controller monitors the availability of all three power sources and selects the highest-priority source that is available.

When PHCN is available, the controller selects the public utility supply and disconnects the generator sources from the load.

When PHCN fails, the controller evaluates the Mikano diesel generator. Once its supply is available and the required operating conditions are satisfied, the system transfers the load to the diesel generator.

If both PHCN and the Mikano generator are unavailable, the controller can select the petrol generator as the third-priority source.

When a higher-priority source becomes available again, the system disconnects the lower-priority source before transferring the load.

The controller also coordinates generator starting and stopping through dedicated control outputs. The Mikano diesel generator uses a starter-cranking relay and fuel-valve control, while the petrol generator has its own starting and stopping circuitry.

GSM communication allows operating status messages to be sent to the designated user and remote commands to be received for generator management.

Manual selector switches provide an additional operating interface for the electrical control panel.

Key Features

Key Features

- Three-phase automatic changeover between three independent power sources
- Priority-based selection of PHCN, Mikano diesel generator and petrol generator
- Custom microcontroller-based embedded control system
- Automatic load transfer through three-phase contactors
- GSM communication using the SIM800L module
- SMS-based generator-control commands and operating feedback
- Diesel generator starter-motor cranking control
- Diesel generator fuel-valve control for engine shutdown
- Petrol generator start and stop control integration
- Automatic return to a higher-priority power source
- Sequential source-disconnection and connection commands
- Automatic and manual operating modes
- Front-panel source indication lamps
- Dedicated source-on-load indicators
- Industrial contactors and auxiliary control relays
- Timing relays and electrical protection components
- Phase-collision protection incorporated into the electrical control assembly
- Custom electronic control boards
- Enclosed industrial electrical control panel

Applications

Applications

Parameter Specification
Product AutoCOS Hybrid
System type Three-source, three-phase automatic changeover
Source 1 PHCN / utility mains
Source 2 Mikano diesel generator — 27 kVA
Source 3 Petrol generator — 8 kVA
Source selection Priority-based
Power switching Three individual three-phase contactors
Embedded control PIC microcontroller-based controller
GSM interface SIM800L
Remote control SMS-based generator commands
Generator management Cranking, fuel-valve and start/stop control
Local controls Auto/manual and source selector switches
Indication Source status and source-on-load indicators
Supporting components DC relays, AC-coil relays, timers, contactors and protection devices
Development Embedded firmware and custom electronic control boards

The 27 kVA and 8 kVA figures identify the two generator capacities. They do not mean that the petrol generator can supply a 27 kVA load. The actual load permitted on each source must remain within that source's capacity and the verified ratings of the contactors, cables and protection devices. The photographs do not independently establish a certified 27 kVA panel rating.

User & Business Benefits

User & Business Benefits

AutoCOS Hybrid is suitable for customized three-phase power-management applications where public utility electricity must be coordinated with multiple backup generators.

Potential applications include commercial buildings, offices, workshops, institutional facilities and other premises requiring automatic source selection, generator management and centralized electrical control.

The system is particularly relevant where backup generators have different capacities and must be operated according to an established priority sequence.

Public Specifications

Public Specifications

System Type: Three-phase automatic changeover and generator management system

Number of Power Sources: Three — PHCN utility supply, Mikano diesel generator and petrol generator

Source Priority: PHCN (Priority 1), Mikano diesel generator (Priority 2), petrol generator (Priority 3)

Generator Capacities: 27 kVA diesel generator and 8 kVA petrol generator

Source Switching: Three individual three-phase contactors controlled through an embedded electronic relay interface

Embedded Controller: PIC microcontroller-based control system

Communication Interface: SIM800L GSM module for SMS-based remote commands and operating feedback

Diesel Generator Control: Automatic starting and stopping using starter-motor cranking and fuel-valve control

Petrol Generator Control: Integrated generator starting and stopping control

Operating Modes: Automatic operation and manual source selection

Status Indication: Individual source indicators and source-on-load indicators

Control Panel Components: Embedded control boards, DC relays, auxiliary relays, three-phase contactors, timers, electrical protection components, selector switches and interconnecting wiring

System Configuration: Custom-engineered three-source power-management panel

Product Classification: Industrial electrical control and embedded automation system

Opstep Engineering Role

Opstep Engineering Role

Opstep Engineering Ltd was responsible for the embedded electronic control and system integration that enable AutoCOS Hybrid to coordinate three-phase power-source selection and generator management.

The engineering work included:

- Embedded control development: Developing the microcontroller-based control logic for source monitoring, priority selection and switching sequences.

- Multi-source changeover logic: Implementing the operating sequence for PHCN, the Mikano diesel generator and the petrol generator.

- Generator automation: Integrating electronic control outputs for generator starting, stopping, starter-motor cranking and diesel fuel-valve operation.

- GSM remote communication: Integrating the SIM800L module for SMS-based generator commands and operating-status feedback.

- Relay and contactor interfacing: Developing the electronic control interface that operates the individual three-phase contactors and auxiliary relays.

- Control-panel integration: Integrating the embedded controller with the panel's switching devices, timers, protection components, status indicators and manual controls.

- System assembly and implementation: Bringing the electronic control boards and associated electrical components together as a coordinated power-management system.

The result is a custom-engineered solution that combines embedded firmware, GSM communication and industrial electrical control to manage three power sources according to a defined priority sequence.

Discuss this product

Need a customized automatic power changeover system?

Opstep Engineering designs and develops embedded electronic control systems for generator automation, power-source management and industrial electrical applications. Whether your installation requires two-source switching or a more advanced multi-generator arrangement, contact Opstep Engineering to discuss your requirements.

START A PROJECT