Project Overview
This project automates watering by continuously monitoring soil moisture and comparing the measured value with user-defined minimum and maximum thresholds.
The documented system includes a resistive soil-moisture sensor, LCD, SIM module for SMS notification and control, user buttons and a solenoid valve for controlling water flow.
How the System Works
- The soil-moisture sensor provides the monitored moisture value.
- The controller compares the measurement with the user-defined thresholds.
- When moisture is below the minimum setting, the watering valve is activated.
- When the moisture reaches the maximum setting, watering is stopped.
- SMS notifications accompany the system actions and a user can override operation through a control message.
System Architecture
◆Soil SensorMoisture measurement
→
◆ControllerThreshold & watering logic
→
◆Solenoid ValveWater-flow control
→
◆SIM ModuleSMS feedback / control
→
◆LCDLocal status
Project Gallery
Actual project photographs and technical images.
Actual project photographs and circuit diagram











