fbpx
Student Engineering Project

Microcontroller Based Automatic Voltage Switch

A microcontroller-based AC voltage monitoring and protection system that disconnects a load when the monitored supply moves outside user-defined limits.

⚙Embedded Systems ◆Student Project
Microcontroller Based Automatic Voltage Switch project prototype
Completed project — Microcontroller Based Automatic Voltage Switch Click to view

Project Overview

This project presents an automatic AC voltage switch designed to monitor an incoming supply and protect a connected load against under-voltage and over-voltage conditions.

The documented system measures the input through a voltage-sensing and signal-conditioning stage, converts the signal for the microcontroller, displays a digital representation on an LCD and controls a load relay. User-defined minimum and maximum limits are stored in the microcontroller EEPROM.

How the System Works

  1. The incoming supply is passed through the documented voltage-sensing and signal-conditioning stages.
  2. The conditioned signal is converted for the microcontroller and represented as a digital voltage reading.
  3. The measured value is continuously compared with the stored minimum and maximum thresholds.
  4. If the supply moves outside the permitted range, the load relay disconnects the appliance.
  5. The system continues monitoring and restores the load when the voltage returns to the acceptable range.

System Architecture

◆AC SupplyVoltage source
→
◆Voltage SensorSignal conditioning
→
◆ADC / ControllerMeasurement & comparison
→
◆RelayLoad protection
→
◆LCDVoltage indication
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT