Project Overview
This project is a compact laser-based security alarm system built around a microcontroller, a VL53L0X Time-of-Flight ranging sensor, a 16×2 LCD and an audible buzzer. The VL53L0X provides distance measurement using an integrated 940 nm VCSEL-based ranging system. It communicates with the controller through the I²C interface and provides the measured distance in millimetres. The sensor itself is designed for absolute distance measurement and supports ranging up to approximately 2 m under appropriate conditions. During operation, the measured distance is displayed on the LCD. The system continuously checks the measured distance against a programmed 500 mm security threshold. When an object is detected at a distance of 500 mm or less, the buzzer is activated for approximately five seconds to provide an audible alarm. The project was developed and tested as a microcontroller-based prototype, with both a Proteus circuit design and a physical hardware implementation.How the System Works
- The microcontroller initializes the LCD, buzzer and I²C communication interface.
- The VL53L0X Time-of-Flight distance sensor is initialized and checked for successful startup.
- The system displays its security-alarm identification information on the LCD.
- The VL53L0X continuously performs distance measurements.
- The microcontroller receives the measured distance from the sensor through the I²C interface.
- The measured distance is displayed on the 16×2 LCD in millimetres.
- The microcontroller compares the measured distance with the programmed 500 mm security threshold.
- When an object is detected at 500 mm or less, the buzzer is activated.
- The buzzer remains active for approximately five seconds as an audible security alert.
- The buzzer is then switched off and the system resumes distance monitoring.
- The system continuously repeats the ranging and alarm-detection process.
System Architecture
◆VL53L0X Time-of-Flight Sensor → I²C → Microcontroller
→
◆Microcontroller → 16×2 LCD → Distance Display
→
◆Microcontroller → Buzzer Driver → Audible Security Alarm
→
◆VL53L0X → Distance Measurement → Microcontroller
→
◆Distance ≤ 500 mm → Microcontroller → Alarm Activation
→
◆Microcontroller → Serial Interface → Debug / Measurement Output
→
◆Power Supply → Microcontroller + Sensor + Display + Alarm Circuit
Project Gallery
Actual project photographs and technical images.
Actual project photographs and circuit diagram




