fbpx
Student Engineering Project

IOT Based Air Quality Monitoring System

Now-a-days the amount of air pollution in atmosphere is rapidly increasing due to the vehicles, industries and urbanization which leads ad adds up to increase of air pollution now affecting human lives.

⚙Embedded Systems ◆Student Project
IOT Based Air Quality Monitoring System project prototype
Completed project — IOT Based Air Quality Monitoring System Click to view

Project Overview

Now-a-days the amount of air pollution in atmosphere is rapidly increasing due to the vehicles, industries and urbanization which leads ad adds up to increase of air pollution now affecting human lives.

IOT based air quality monitoring system using MQ135 and arduino is used to display the air quality over an internet server and it will alarm when the air quality level satisfactory goes underneath a certain degree, whilst there is enough dangerous gases found in atmosphere such as SO2, CO2, smoke, benze steam, alcohol and NH3, the air quality level is displayed in ppm on the liquid crystal display and at the website so the air quality level can be monitored quickly. Here we are going to use mq135 gas sensor to monitor the air quality it will measure the harmful gases that are present in air and in what quantity.

This system can be installed anywhere and readings monitored from any where as long as internet services is available from either a computer or a mobile phone. Previously we have built the IOT Gas Monitoring with Alarm , Andriod App Bluetooth Gas Detector , Gas Monitoring With SMS Feedback , Gas Detection Evacuation with SMS Feedback , and Fire Smoke Monitoring System with Alarm but this time we have used MQ135 sensor as the air quality sensor which is the best choice for monitoring Air Quality as it can detects most harmful gases and can measure their amount accurately.

In this IOT project, you can monitor the pollution level from anywhere using your computer or mobile. We can install this system anywhere and can also trigger some device when pollution goes beyond some level, like we can switch on the Exhaust fan or can send alert SMS/mail to the user.

How the System Works

  1. The system is described in the historical project documentation preserved for this project.
  2. The documented inputs, controller or processing stages receive and process the relevant project signals.
  3. The controller or circuit performs the functions described in the original project material.
  4. The documented outputs provide the project response, indication or control.
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT