fbpx
Student Engineering Project

FingerPrint Based Security System using FPM-10A

When a finger is kept at the finger print reader (FPM10A), it will give the information accordingly to microcontroller by sending appropriate commands to the reader and which is displayed on the LCD.

⚙Embedded Systems ◆Student Project
FingerPrint Based Security System using FPM-10A project prototype
Completed project — FingerPrint Based Security System using FPM-10A Click to view

Project Overview

When a finger is kept at the finger print reader (FPM10A), it will give the information accordingly to microcontroller by sending appropriate commands to the reader and which is displayed on the LCD. If the information matches with the one within the device then the DC motor interfaced to the microcontroller responds accordingly. And if the information provided by the user is incorrect or mismatch in finger prints is detected then access is denied. Finger print reader and the microcontroller unit are connected using serial interface. Nowadays accurate personal identification is becoming more and more important.

Usual means (smart cards, passwords…) have shown their limits (falsification, loss…). Biometrics (i.e. analysis of personal biological characteristics) can bring a satisfying answer to those latter problems. Currently fingerprint recognition is the most widely used technique for personal identification. Fingerprints are made up of locally parallel ridges with singular points (minutiae), and they constitute a unique permanent universal pattern. The use of ink and paper to get an image from a finger was used for a long time, but technological advances have enabled to automate the acquisition stage by means of solid-state sensors.

These sensors exploit different techniques to acquire the image (pressure, electrical field, temperature…) and require a static (matrix sensor) or mobile finger position (sweeping mode sensor). Our project is developed to provide security for an Organization.

In this project the fingerprint sensor sense the thumb impression of the corresponding person and that image will be compared with registered image, if the both images are unique, then the finger print device activates particular task like inform the microcontroller of a match which in turn activate a motor driver IC to open a sliding door for entering purpose and then close the sliding door again to full lock mode. The project contains 2 modes, the first one is master mode and the second is user mode. The master mode is used to register the new user and gives the mode of authorization.

The master mode has the ability to create and delete the users. The user mode is an ordinary mode used for the authentication of the employees or user. In user mode of authorization, creation and deletion of a user cannot be performed apart from the FPM10A fingerprint scanner, the codes written for this Biometrics Access Control System will also serve the ZFM-20 series fingerprint scanners

How the System Works

  1. The system is described in the historical project documentation preserved for this project.
  2. The documented inputs, controller or processing stages receive and process the relevant project signals.
  3. The controller or circuit performs the functions described in the original project material.
  4. The documented outputs provide the project response, indication or control.
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT