Project Overview
Despite of the existence of a numerous implementations of embedded system coding, designing an AC digital voltmeter (DVM) is still considered as an innovative implementation. A digital voltmeter is a very necessary instrument in an electrical lab. A voltmeter is an instrument used for measuring the electrical potential difference between two points in an electric circuit. At first analog voltmeters were very popular among the people for taking the reading of the voltage. On later period, digital voltmeters were introduced and became popular.
Analog voltmeters move a pointer across a scale in proportion to the voltage of the circuit; digital voltmeters give a numerical display of voltage by use of an analog to digital converter. The first digital voltmeter was invented and produced by Andrew Kay of Non-Linear Systems in 1954. Digital voltmeters (DVM) are usually designed around a special type of analog-to-digital converter called an integrating converter. Voltmeter accuracy is affected by many factors, including temperature and supply voltage variations.
To ensure that a digital voltmeter's reading is within the manufacturer's specified tolerances, they should be periodically calibrated against a voltage standard. These types of voltmeters are very cheap and also very flexible to the users. This paper will describe how to make a simple digital ac voltmeter using a PIC16F876A microcontroller. The range of this DVM is 0-220V, but the range can be easily increased or decreased based on the requirements just using the calibration process described in this project.
The PIC microcontroller reads the input voltage through one of the 8 analog channels and converts it to a 10-bit digital number using the internal ADC. Doing some calculation with ADC conversion, this number can be converted to the actual measured voltage. The voltage is displayed through a liquid crystal display unit (LCD)
How the System Works
- The system is described in the historical project documentation preserved for this project.
- The documented inputs, controller or processing stages receive and process the relevant project signals.
- The controller or circuit performs the functions described in the original project material.
- The documented outputs provide the project response, indication or control.

