fbpx
Student Engineering Project

Biometrics Access Control System using the SM-630A Fingerprint Scanner

The goal of our project is to design and assemble a biometric access control system that uses fingerprint scanning and recognition to authenticate the user.

⚙Embedded Systems ◆Student Project
Biometrics Access Control System using the SM-630A Fingerprint Scanner project prototype
Completed project — Biometrics Access Control System using the SM-630A Fingerprint Scanner Click to view

Project Overview

The goal of our project is to design and assemble a biometric access control system that uses fingerprint scanning and recognition to authenticate the user. Upon successful authentication, the user will be allowed to access the safe. On the other hand, if the access is denied, it will be reported to the lcd screen and tone received from the buzzer. The fingerprint scanning device utilizes serial communication. This device will be connected to our microprocessor using the UART ports.

The system will consist of an PIC18f2520 microcontroller, LCD display, fingerprint sensor (SM-630A), a magnetic solenoid lock (electronic door) , and TTL to USB PC interfacing. Software will be written for the system allows registration of fingerprint stamps, deletion of user's print, and option to gain access with the help of the attached matrix keypad with administrative passcode check and monitor door entry. LCD’s and LED’s will be used to display whether or not access was granted or denied. The biometric access control system we are designing is beneficial for a number of reasons.

It provides high identification performance, low power consumption, and can easily be integrated into a wide number of applications such as a door lock system, safe box, simple access controller, vehicle control, and ATM. Our device will differ from other devices out on the market due to our systems ability to be interfaced with a keypad to allow passcode verification before user's fingerprint can be added or deleted. This feature will make setting up and securing the system easy. A PIC microcontroller will be used to interface all of the components in our system.

The fingerprint scanner is controlled using RS-232 serial communication so this device will be connected via its UART pins to the microcontroller UART pins. An FTDI serial-to-USB chip will be used to interface the microcontroller to the PC again using the UART pins on the microcontroller.

One major component that will be used is the fingerprint scanning and recognition device SM-630A like in a previous design FingerPrint Based Security Door where the FPM-10A, ZFM-20 series was used. and better alternative will be the GT-511 fingerprint module fingerprint scanner; It is a durable compact device with a fingerprint identification module that houses an optics based fingerprint sensor.

How the System Works

  1. The system is described in the historical project documentation preserved for this project.
  2. The documented inputs, controller or processing stages receive and process the relevant project signals.
  3. The controller or circuit performs the functions described in the original project material.
  4. The documented outputs provide the project response, indication or control.
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT