Project Overview
This project proposes an automatic watering system for potted plants based on continuous soil-moisture monitoring.
A soil-moisture sensor provides the plant-pot moisture data, while a microcontroller processes the reading and controls a small pump through a suitable driver. A display provides local feedback about moisture and system activity.
How the System Works
- The soil-moisture sensor measures the condition of the plant soil.
- The microcontroller reads and evaluates the moisture information.
- When the soil is too dry, the controller activates the pump through its driver.
- The pump supplies water to the plant until the control condition is satisfied.
- The display communicates moisture information and system actions to the user.
System Architecture
◆Soil Moisture SensorMoisture measurement
→
◆MicrocontrollerMonitoring & decision logic
→
◆Pump DriverCurrent switching
→
◆Water PumpWater delivery
→
◆DisplayStatus information
Project Gallery
Actual project photographs and technical images.
Actual project photographs and circuit diagram








