fbpx
Student Engineering Project

Automatic Letter Detector for Home Letter Box with Counter and SMS Feedback

So people need an automatic system that gives message or indication for the incoming posts in conveniences, efficiently and in reliable method, an Automatic Letter Detector for Home Letter Box with Counter and SMS Feedback it is.

⚙Embedded Systems ◆Student Project
Automatic Letter Detector for Home Letter Box with Counter and SMS Feedback project prototype
Completed project — Automatic Letter Detector for Home Letter Box with Counter and SMS Feedback Click to view

Project Overview

So people need an automatic system that gives message or indication for the incoming posts in conveniences, efficiently and in reliable method, an Automatic Letter Detector for Home Letter Box with Counter and SMS Feedback it is. If someone wants to know whether there is a letter present or not inside the letter box, electronic letter box device can help him. In this device light depending resistor (LDR) and a white Light emitting diode (LED) is used as a sensor to detect the presence of letter in the letter box.

Thus this circuit solves the problem of going again and again to the gate of the house to check-up whether a letter is there in the box or not. the system has a keypad with which a sender can drop their name and a brief title for the letter being dropped in the box also connected is a GSM module with which a user is notified of the presence of a new letter in the box along with the sender's details like a name and address and a brief subject of the letter, the SMS notification also includes the total count of letter in the box. lastly the system has a button switch so that when a user empties the box, the button is pressed and the count is reset to zero.

For the indication circuit in the home or in the office, two LEDs, one is green LED and second is red LED are used to indicate if any letter is present in the letter box or not. When there is no letter present in the letter box, the green LED will glow. As soon as a letter is put in the box, the green LED goes OFF, and the red LED will glow. For the power supply we can use for battery supply or small DC power rectifier. In this circuit is very less power consumption.  There is provision for OFF the system if there is nobody at home or in the office during holidays.

Due to this provision we can reduced its power consumption and also reduced its chanced of failure. The electronic letter box with counter, a display unit and wireless means of informing a user of new letter received with details of sender, Unlike conventional ones done before, the wireless means of informing a user of arrival of a new letter, letter sender name and the total number of letters receives, make this unique. The system also has attached, a control button with which the total number of received letters can be cleared to zero whenever all letter are removed and the box empty.

The system makes use of a microcontroller with EEPROM feature so that letter counts are not lost in the case of power outage or system switch-off or reset. The system has ability to remember the last letter count and total letter received for a period of 40 years if the clear button is not pushed. The display unit (LCD) attached to the system help intimate letter sender and user of the happening and current operation been carried out by the system.

The system also has attached, a 4x4 matrix keypad with numbers from 0 to 9 and alphabets from A to D. this to help a letter sender input names before the notification is given a user remotely of the sender name, a new letter received and total letter in the box. The feedback mechanism is made available by the inbuilt mobile phone module present in the system. For letters to be acknowledged, it must pass through the letter hole and so temporarily interrupt the LDR planted inside the system.

The LDR is there to be interrupted, once that occurs, the system interprets that as an arrival of a new letter and thus increment the letter counter by one. LDR is a special kind of resistor whose action based on the intensity of light declining on it. In the time of total darkness LDR resistance is approximately 1 mega ohm while at the time of bright light its resistance is 2-5 ohm. In this circuit the light source is adjusted with the LDR in such a way that the light will directly drop on the LDR so that when any letter comes inside the letter box it will chunk the light beam and LDR will be beneath darkness.

In the making of this system, several electronic components and modules were used, opto-interrupter, keypad, phone module, LCD, microcontroller, Button, Switch, resistors, capacitors, voltage regulator, etc.

How the System Works

  1. The system is described in the historical project documentation preserved for this project.
  2. The documented inputs, controller or processing stages receive and process the relevant project signals.
  3. The controller or circuit performs the functions described in the original project material.
  4. The documented outputs provide the project response, indication or control.
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT