fbpx
Student Engineering Project

Designing a Pulse Oximeter with MAX30102 and ATmega328P

An educational pulse-oximeter design using the MAX30102 sensor, ATmega328P and 1602 LCD display.

▣ATmega328P ⚙Embedded Systems ◆Student Project
Designing a Pulse Oximeter with MAX30102 and ATmega328P project prototype
Completed project — Designing a Pulse Oximeter with MAX30102 and ATmega328P Click to view

Project Overview

This project presents an educational embedded design for measuring pulse rate and estimating blood oxygen saturation using the MAX30102 sensor and an ATmega328P microcontroller.

The documented design combines the sensor with a 1602 LCD, a 16 MHz crystal oscillator, regulated 5 V and 3.3 V supplies, and supporting capacitors and controls.

This page documents the engineering design as a student project; it is not presented as a clinically validated medical device.

How the System Works

  1. The MAX30102 acquires optical pulse-oximetry signals.
  2. The ATmega328P communicates with the sensor and receives measurement data.
  3. The embedded software processes the sensor data to derive pulse-rate and SpO₂ values.
  4. The processed readings are sent to the 1602 LCD for local display.
  5. Regulated supplies provide 5 V for the controller/display section and 3.3 V for the MAX30102 sensor.

System Architecture

◆MAX30102Optical sensing
→
◆ATmega328PData acquisition & processing
→
◆Signal ProcessingPulse & SpO₂ calculation
→
◆1602 LCDLocal results display
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT