fbpx
Student Engineering Project

Contactless Tachometer

This write up describes how to build a contact -less tachometer (device used to count the revolutions per minute of a rotating shaft) using a microcontroller and a proximity sensor.

⚙Embedded Systems ◆Student Project
Contactless Tachometer project prototype
Completed project — Contactless Tachometer Click to view

Project Overview

This write up describes how to build a contact -less tachometer (device used to count the revolutions per minute of a rotating shaft) using a microcontroller and a proximity sensor. As the name implies, what makes this device special, is that it can very accurately measure the rotational speed of a shaft without even touching it. This is very interesting when making direct contact with the rotating shaft is not an option or will reduce the velocity of the shaft, giving faulty readings.

This device is built on a microcontroller, an alpha-numeric LCD module and a proximity sensor to detect the rotation of the shaft whose speed is being measured. Key Features: Measures up to 99 000 RPM Instantaneous measurement Automatic DATA Hold Function LCD display The idea behind most digital counting device, frequency meters and tachometers, is a micro-controller, used to count the pulses coming from a sensor or any other electronic device.

In the case of this tachometer, the counted pluses will come from proximity sensor, which will detect any reflective element passing in front of it, and thus, will give an output pulse for each and every rotation of the shaft, as show in the picture. Those pulses will be fed to the microcontroller and counted. Instantaneous measurement algorithm To be able to deduce an RPM reading in less than second, while constantly refining the reading’s accuracy, a simple algorithm have been developed, where a counter and a timer are used.

Counter and timers are part of the internal features of a micro-controller and are used in this project which can be easily configured through programming. The schematic above shows how the timer and the counter are used for this task; The counter is connected in such a way to count pulses coming from the proximity sensor, while the timer is used to precisely feed the counted value to the microcontroller every filth of a second, and reset the counter to 0.

The microcontroller can now take an average of the last 3 readings (saved in counter C1, C2 and C3) and calculate the average numbers of pulses per fifth second, then multiply this value by 5, to get the number of pulses per second, then multiply this value by 60 to get the number of pulses per minute, which represents the measured RPM. The only purpose of calculating an average reading is that it will allow getting more stable reading and preventing display flickering.

How the System Works

  1. The system is described in the historical project documentation preserved for this project.
  2. The documented inputs, controller or processing stages receive and process the relevant project signals.
  3. The controller or circuit performs the functions described in the original project material.
  4. The documented outputs provide the project response, indication or control.
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT