fbpx
Student Engineering Project

Fire Smoke Monitoring System with Alarm

The project topic proposes a security system against smoke or fire, with ability to inform house users and where ever it is installed of a possible happening when either or both scenario of fire (using a smoke/gas sensor).

⚙Embedded Systems ◆Student Project
Fire Smoke Monitoring System with Alarm project prototype
Completed project — Fire Smoke Monitoring System with Alarm Click to view

Project Overview

The project topic proposes a security system against smoke or fire, with ability to inform house users and where ever it is installed of a possible happening when either or both scenario of fire (using a smoke/gas sensor). The system will alert on  the happening by enabling a connected alarm buzzer. This alert comes in real-time to when the happening occurs and remains until there is a state change to normalcy. The proposed fire sensor system combines the functions of a smoke and gas monitoring which are often signs of a possible fire outbreak in homes today, presence of smoke are always the attribute of a fire outbreak scenario.

The alarm is for audio notification when smoke, fire  and gas is sensed in area restricted. The system at the advent of a fire outbreak automatically enables an alarm system to warn persons in d concern area to move out quickly and make those around aware of danger, while these are on; the system still through its connected sensors still monitors the area for reduction or total disappearance of smoke. If this happens, the alarm system is switched off.

For an important work as this, timing becomes very critical and important which is why the whole system runs around a microcontroller operating at very high frequency and speed, microcontroller stand best also for its low power consumption with a wide range of internal peripherals like Timers, ADC, Counters, Serial Communication ports and others needed to make this system possible without the fear of additional circuitries that can affect the overall workings of the system.

Introduction: In line with the above abstract, the automatic fire monitoring system is such that monitors the house against possible fire out break through the smoke and gas sensor. The sensor is wired around a core-controller who waits state changes at the sensor point.  In any case of possible smoke detection, the controller using the attached alarm buzzer notify user of current happenings in the installed area.

How the System Works

  1. The system is described in the historical project documentation preserved for this project.
  2. The documented inputs, controller or processing stages receive and process the relevant project signals.
  3. The controller or circuit performs the functions described in the original project material.
  4. The documented outputs provide the project response, indication or control.
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT