Project Overview
Access control using technological means is generally considered to be expensive and only useful in large organizations, offices or business places. This project entails the design and construction of a cost effective access control system which embraces the Radio Frequency Identification (RFID) technology as the primary means of identification and also implements the use of passwords via a keypad for added security accessible only by an administrator. An inexpensive means of data storage was employed by storing access logs and access lists in the EEPROM of the target microcontroller.
The detailed analysis of the software and hardware interface designs are shown in this report. The result is an inexpensive, fully functional standalone access control device which can be powered via 12V batter with a charger sourcing power from the MAINS attached. The system should carry out the following functions 1. Register any given RFID tag or card 2. Delete existing RFID tag or card 3. Verify every RFID card or tag and allow access if found registered on the system’s database or decline access if not found registered on the system’s database. 4. User visual interaction with the help of an attached liquid crystal display (LCD). 5.
User audible notification for swiped card function, correct and incorrect passcode input, access granted or decline. 6. Administrative access via an attached matrix keypad for passcode inputting and other admin’s function such as add RFID card or tag and delete RFID card or tag, passcode change. 7. Electronically control motor (servo or stepper) with a bar that moves up and down to depict access granted or decline. The system circuit diagram and simulation is done on Proteus Labcenter (ISIS) while the PCB design is drawn on same application (ARES) version.
The system runs on a microcontroller whose code are written using MPLAB IDE with C Compiler integrated using the C language.
How the System Works
- The system is described in the historical project documentation preserved for this project.
- The documented inputs, controller or processing stages receive and process the relevant project signals.
- The controller or circuit performs the functions described in the original project material.
- The documented outputs provide the project response, indication or control.

