Project Overview
This Gas monitor senses for gas leakage within an enclosure like a room or kitchen, it has a blower and an extractor to disperse gas quickly into the outside environment, it also has an alarm to give audible notification to those around and it has a SIM800L module for sending text message (SMS) to a user of the situation within the environment where the system is to monitor and report on. Gas leakage is a major problem with industrial sector, residential premises and gas powered vehicles like CNG (Compressed Natural Gas) buses, cars, etc.
One of the preventive methods to stop accidents associated with the gas leakage is to install a gas leakage detection device at vulnerable places. The aim of this project is to develop such a device that can automatically detect gas leakages in vulnerable areas and as well alert the owner anywhere in the world via GSM network while it combats the gas. The system detects the leakage of the LPG (Liquefied Petroleum Gas) using MQ2 gas sensor and uses the GSM phone to alert the person about the gas leakage via text message.
When the LPG concentration in the air exceeds a certain level, the gas sensor senses the gas leakage and the output of the sensor goes LOW. This is detected by the microcontroller, and the system then switches on the two connected fans used as blower and extractor while the alarm goes off and the SIM module sends SMS until the gas is cleared and another SMS notification is sent to inform on the state of the environment.
How the System Works
- The system is described in the historical project documentation preserved for this project.
- The documented inputs, controller or processing stages receive and process the relevant project signals.
- The controller or circuit performs the functions described in the original project material.
- The documented outputs provide the project response, indication or control.
Project Gallery
Actual project photographs and technical images.
Actual project photographs and circuit diagram







