Project Overview
This project provides remote control of electrical loads through DTMF tones sent from a GSM phone call.
The incoming tones are decoded by an MT8870 into BCD information for the PIC16F628A. The controller interprets the received code and switches the corresponding relay outputs for connected appliances.
How the System Works
- The user calls the GSM device connected to the control system.
- Keypad tones from the call are received as DTMF signals.
- The MT8870 converts the DTMF tones into BCD information.
- The PIC16F628A checks the decoded command against its programmed control logic.
- The appropriate relay output is switched to turn a connected appliance on or off.
System Architecture
◆GSM PhoneDTMF command source
→
◆GSM TransceiverCall path
→
◆MT8870DTMF-to-BCD decoding
→
◆PIC16F628ACommand logic
→
◆Relay OutputsAppliance switching

