fbpx
Student Engineering Project

Microcontroller Based Digital Scale

A PIC16F876A digital weighing balance using a 50 kg load cell, HX711 interface and LCD display.

▣PIC16F876A ⚙Embedded Systems ◆Student Project
Microcontroller Based Digital Scale project prototype
Completed project — Microcontroller Based Digital Scale Click to view

Project Overview

This project describes a portable digital weighing system built around a 50 kg load cell and the HX711 weight-sensor interface.

The HX711 amplifies and digitally converts the low-level load-cell signal before the measurement is processed by the PIC16F876A and displayed on an LCD. A push button is provided for calibration.

How the System Works

  1. The load cell produces a small differential signal as the applied mass changes.
  2. The HX711 amplifies and converts the load-cell signal into digital data.
  3. The PIC16F876A reads the measurement through the documented serial interface.
  4. The controller converts the measurement into a weight value and displays it in kilograms.
  5. The system can be calibrated using the provided push button.

System Architecture

◆50 kg Load CellWeight sensing
→
◆HX711Amplification & ADC
→
◆PIC16F876AMeasurement processing
→
◆LCDWeight display
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT