fbpx
← BACK TO PRODUCTS
Remote GSM Security Alarm

SMS-Controlled Remote Alarm System with Android App

A remotely controlled security alarm system that allows users to activate or deactivate a powerful six-tone siren directly from an Android application. Using SMS commands delivered through the SIM800L GSM module, the system provides remote alarm control, status notifications and a rechargeable 12 V battery backup with automatic power-management protection.

Remote SMS-controlled security alarm system with six-tone siren and embedded control electronics.
What it does

What the product does

The SMS-Controlled Remote Alarm System enables a user to operate a remote siren alarm using a dedicated Android application.

The app provides two straightforward controls: Start Alarm and Deactivate Alarm. When the user presses Start Alarm, the application sends an SMS command to the SIM number installed in the alarm system. The embedded controller processes the command and activates the siren. When Deactivate Alarm is pressed, the application sends the corresponding deactivation command and the siren is switched off.

The system is housed in an enclosure containing the embedded control electronics, GSM communication module, power-management circuitry and six-tone siren.

It is designed to remain operational using a 12 V, 7.5 Ah rechargeable battery when mains power is unavailable. Additional control circuitry isolates the battery from the charger when AC power fails and disconnects the alarm load when the battery voltage falls below its configured protection level.

How it works

How it works

The user opens the dedicated Android remote alarm application.
The user presses Start Alarm to activate the security siren.
The Android application sends the programmed activation SMS command to the SIM number installed in the alarm system.
The SIM800L receives the SMS and passes the message to the embedded controller.
The PIC16F628A processes the received command and activates the alarm output.
The six-tone siren sounds to provide an audible security warning.
The system sends an SMS status confirmation after processing the command.
When the user presses Deactivate Alarm, the application sends the programmed deactivation SMS command.
The embedded controller processes the deactivation command and switches off the alarm output.
The system sends an SMS confirmation that the alarm has been deactivated.
The controller stores the alarm state in EEPROM so the stored state can be restored after a restart.
During mains power failure, the battery supplies the alarm system.
The charger-isolation relay disconnects the battery from the charger when AC power is absent and reconnects it when AC power returns.
The battery-protection controller disconnects the alarm load when battery voltage falls below 10.4 V and reconnects the load when the voltage rises to 10.6 V.

Key Features

Key Features

Android application for remote alarm control
Dedicated Start Alarm button
Dedicated Deactivate Alarm button
SMS-based remote control
SIM800L GSM communication
Six-tone audible siren
12 V rechargeable battery backup
7.5 Ah battery capacity
Automatic charger-to-battery isolation
AC power-failure response
Automatic charger reconnection when AC returns
Low-battery load disconnection
10.4 V low-voltage cutoff
10.6 V load-reconnection threshold
Embedded microcontroller control
EEPROM storage of alarm state
SMS alarm-status confirmation
Enclosed electronic control assembly

Applications

Applications

* Homes and residential properties
* Shops and retail premises
* Offices and small commercial buildings
* Workshops and equipment rooms
* Remote locations requiring SMS-based alarm control
* Properties where battery backup is required during power outages

User & Business Benefits

User & Business Benefits

Remote operation: Activate or deactivate the siren from the Android application without operating a physical switch at the alarm unit.

Simple user interface: Two dedicated buttons reduce the complexity of controlling the alarm.

GSM-based communication: The system uses SMS commands through the SIM800L, so it does not depend on the phone and alarm being connected to the same Wi-Fi network.

Audible deterrence: The six-tone siren provides a prominent audible warning when activated.

Battery-backed operation: The 12 V, 7.5 Ah battery allows the system to continue operating when mains power is unavailable, subject to battery condition and load.

Battery protection: The low-voltage control circuit disconnects the alarm load at the configured cutoff and reconnects it after the battery voltage recovers.

Improved charging isolation: A separate relay prevents the battery from discharging through the charger when AC power is absent.

Status feedback: SMS confirmations report the processed alarm command.

Public Specifications

Public Specifications

Specification Details
Product type SMS-controlled remote security alarm
Mobile interface Dedicated Android application
Control method SMS commands
GSM module SIM800L
Embedded controller PIC16F628A
Audible output Six-tone siren
Battery 12 V, 7.5 Ah
Charging arrangement Smart charger with AC-dependent battery isolation
Low-voltage cutoff 10.4 V
Load reconnection threshold 10.6 V
Alarm activation command #1
Alarm deactivation command #0
Status feedback SMS confirmation
Enclosure Enclosed electronic assembly

Opstep Engineering Role

Opstep Engineering Role

Embedded control, GSM communication, Android application integration and backup-power management.

The system combines embedded firmware with an Android application and purpose-built power-management circuitry to deliver remote siren control and battery-backed operation.

Discuss this product

Interested in this product or a customised version?

Contact Opstep Engineering to discuss product enquiries, deployment requirements or a related embedded security system.

START A PROJECT