fbpx
Student Engineering Project

Digital FM Radio Transmitter with Microcontroller Control

An embedded FM transmission control system built around a digital FM transmitter module and PIC16F876A microcontroller, providing LCD-based frequency and volume control, UART communication and non-volatile storage of operating settings.

▣PIC16F876A ⚙Embedded Systems ◆Student Project
Digital FM Radio Transmitter control circuit using PIC16F876A
Completed project — Digital FM Radio Transmitter with Microcontroller Control Click to view

Project Overview

This project is an embedded FM radio transmission control system built around a digital FM transmitter module and a PIC16F876A microcontroller. The FM transmitter module provides the actual radio-frequency transmission, while the PIC16F876A provides the embedded control and user-interface layer. A 16×2 LCD and push-button interface allow the operator to select and adjust the transmission frequency and audio volume and control the operating state of the transmitter. The PIC processes these user commands and communicates with the FM transmitter through its TTL UART interface, sending serial commands to configure and control the radio module. The PIC16F876A's internal EEPROM is used to retain operating settings. The selected frequency and volume are stored in non-volatile memory and retrieved when the system is powered on. The microcontroller then uses the stored parameters to initialize the FM transmitter module, restoring the previous operating configuration automatically.

How the System Works

  1. User Input — The operator uses the push buttons to select the frequency or volume adjustment function.
  2. Frequency and Volume Adjustment — The PIC16F876A reads the button commands and updates the selected operating parameter while displaying the current setting on the 16×2 LCD.
  3. Parameter Storage — The selected frequency and volume settings are stored in the PIC16F876A internal EEPROM for non-volatile retention.
  4. UART Configuration — The PIC16F876A sends serial control commands through its UART interface to configure the connected FM transmitter module.
  5. FM Transmission — The digital FM transmitter module applies the configured frequency and volume settings and performs the actual FM transmission.
  6. Power-Up Restoration — When the system is powered on again, the PIC retrieves the stored settings from EEPROM and uses them to initialize the FM transmitter module.

System Architecture

◆User Interface16×2 LCD and push buttons for frequency, volume and operating control
→
◆PIC16F876AEmbedded control, user-interface processing and transmitter management
→
◆TTL UARTSerial communication between the microcontroller and FM transmitter module
→
◆Digital FM Transmitter ModuleFM signal generation and radio-frequency transmission
HAVE AN ENGINEERING PROJECT IN MIND?

Let's develop it properly.

START A PROJECT